EUMAKERS is becoming increasingly GREEN!
One product, two ways to respect the environment!
EUMAKERS is pleased to present the ECO filaments, the first high-quality recycled products line with the 500 g EUBIO and 2Life pair of spools.
EUBIO is a PLA filament obtained by the BIO bags used for recycling products from SMP, a leading company in our industry group.
Its colour tends to be pastel green with satin finish.
2Life: Is a PLA filament obtained from production waste of our filament. Primarily military green in colour, its colour spans the spectrum ranging from yellow to grey, and allows iridescent prints with particular aesthetic impact.
Colours: Pastel Green and Military Green
Weight: 500+500 g (Net)
When the filament has been used up, you can reuse the two spools to create two practical coat hangers or you can visit our "3D Models" section to find out how to make great home design objects.
N.B. The two spools, available in diameters of 1.75 mm and 2.85 mm, are packed in pairs and allow simultaneous use in two different printers thanks to a handy external support.
All EUMARKERS filaments are produced in our factories situated in Italy, respecting the highest standards of production.
They are manufactured with food-safe materials.
The spool can be converted into a coat hanger!
The idea arises from the will and the need to reduce waste. When the filament is over, the spool could be transformed into a coat hanger.
The spool holder for your desk
Sometimes it could be hard mounting the spool in the 3D printer, so we have just eliminated the root cause including a practical spool support for your desk.
All filaments and spools are vacuum sealed to prevent damage from the environmental exposure. In the box you will find a zipper bag to storage them when in use.
Weight: 500+500 g
Diameter Tolerance: ± 0,05 millimetri
Recommended Printing Temperature: 190-210°C
Recommended Printing Speed: 40-100 mm/s
It is recommended to use a heated print bed (not strictly necessary): 50-60°C