- Technical Specifications
- How to transform the spool into a clothes hanger
- Other Information
Two 500 g independent spools for 1 kg of filament in total.
Colours: White - Black
Weight: 500+500 g (Net)
When the filament has been used up, you can reuse the two spools to create two practical coat hangers or you can visit our "3D Models" section to find out how to make great home design objects.
|Material||Polylactic Acid (PLA)|
|Filament net weight||± 500 gr x 2|
|Diameter||1.75 mm / 2.85 mm|
|Diameter Tollerance||± 0.05 mm|
|Recommended printing temperature||Da 190°C a 210°C|
|Recommended printing speed||40/80mm/s|
|Fusion Temperature||210°C (± 8°C)|
|Vitrous transiction temperature||50°C|
|Ovalization tolerance||(max) ± 5%|
|Density||(21.5°C) 1,24 g/c2|
|Impact strength||5 KJ/m2|
|Elasticity||3310 Mpa (MD) - 3861 Mpa (TD)|
All EUMARKERS filaments are produced in our factories situated in Italy, respecting the highest standards of production.
They are manufactured with food-safe materials.
The spool can be converted into a coat hanger!
The idea arises from the will and the need to reduce waste. When the filament is over, the spool could be transformed into a coat hanger.
The spool holder for your desk
Sometimes it could be hard mounting the spool in the 3D printer, so we have just eliminated the root cause including a practical spool support for your desk.
All filaments and spools are vacuum sealed to prevent damage from the environmental exposure. In the box you will find a zipper bag to storage them when in use.