- How to transform the spool into a clothes hanger
- Other Information
Green glossy PLA filament with a new spool that can be used as a hanger, with desktop stand.
This special filament is highly polished; when under a direct light, it yields a glare and a scattered glow.
Weight: 1 kg (net)
|Material||Polylactic Acid (PLA)|
|Filament net weight||± 1 Kg|
|Diameter||1.75 mm / 2.85 mm|
|Diameter Tollerance||± 0.05 mm|
|Recommended printing temperature||Da 190°C a 210°C|
|Recommended printing speed||40/80mm/s|
|Fusion Temperature||210°C (± 8°C)|
|Vitrous transiction temperature||50°C|
|Ovalization tolerance||(max) ± 5%|
|Density||(21.5°C) 1,24 g/c2|
|Impact strength||5 KJ/m2|
|Elasticity||3310 Mpa (MD) - 3861 Mpa (TD)|
All EUMARKERS filaments are produced in our factories situated in Italy, respecting the highest standards of production.
They are manufactured with food-safe materials.
The spool can be converted into a coat hanger!
The idea arises from the will and the need to reduce waste. When the filament is over, the spool could be transformed into a coat hanger.
The spool holder for your desk
Sometimes it could be hard mounting the spool in the 3D printer, so we have just eliminated the root cause including a practical spool support for your desk.
All filaments and spools are vacuum sealed to prevent damage from the environmental exposure. In the box you will find a zipper bag to storage them when in use.