Detalles
INFORMATION ON 3D PRINTING
Technologies: fused filament fabrication
Cilindric Print Area: Ø 200 mm – 400 mm h
Max Print weight: 442 mm
Nozzle diameter: 0.4 mm/changeable nozzle
Print resolution: 0.05 mm < 0.25 mm
Accuracy X, Y 0.012 mm / 0.005 mm Z axis
Maximum speed: 300 mm / s
Filament diameter: 1.75 mm / 3.00 mm*
Filaments used: ABS,PLA, PET, Nylon, Flex, Polystyrene, Laywood, Experimental
*CHANGEABLE EXTRUDER
With extruder for fluid-dense materials you can use clay, porcelain, etc… (see the fluid-dense materials extruder)
SOFTWARE
Operating Systems: Windows XP -7-8, Mac OSX, Linux
Software slicing: Cura – Slyc3r
Software interface Printrun – Repetier Host Firmware: Marlin
File type: . Stl , . Obj . Gcode
INTERFACE
SD Card – LCD Screen
PHYSICAL DIMENSIONS
Dimensions: 470x470x870 mm
Machine weight: 20kg
SUPPLY
Input: 240V 50 -60Hz
Power Consumption: 80W Print – 30o W hot pad.
TEMPERATURE
Use: 20-30 ° C
Warehouse: 0-30 ° C
Nozzle: max 260 ° C
Hot Pad: max 100 ° C
MECHANICS
Frame and cover: Aluminium, polycarbonate and plexiglass
Printing bed: Glass
Movements: industrial guides on alluminium slides
Motors: Nema 17 Stepper , 1/16 micro stepping
RESURRECTION SYSTEM
It is a system which allow users to save their print job and resume it in the case of power failure.
The principle of this “Stop and Save” system is simple: when you pause a print job, the system automatically saves the coordinates (X, Y, Z) of where the print job stopped in an SD card. When the user wants to reactivate the print job, he can begin the printing at the location where it left off. The system saves the coordinates to a file they named as ‘resurrection. g.’ Read more.