FREE WORLDWIDE SHIPPING on filaments orders over €115
My Cart

Mini Cart

Bubble Nest [Birdhouse]

Bubble Nest [Birdhouse]

€0.00

An unusual and poetic birdhouse to decorate balconies or terraces, as well as a way to give these cute little animals a well-deserved rest. Embrace nature!

 

Note: For correct use of the house please read the information on the description sheet below.

 

Designed by: Serena Fanara

 

DOWNLOAD 3D MODEL (.stl)

 


FREE WORLDWIDE SHIPPING on filaments orders over €115
Details
INSTRUCTIONS

Download and print our free 3D models and, mounting them with some parts of EUMAKERS spool (the parts you will need are indicated in the pictures you will find in the Zip file), you'll be able to easily create this design object.

 

Bubble Nest - Birdhouse

Some species of birds nest in the branches of trees and bushes, while others only reproduce in cavities; in spring and summer these birds are not found in areas with no nooks for them to nest in. The installation of artificial nests allows the return of these species, scarcely present in these areas due to the lack of nests.
The most suitable period for installing Bubble Nest is autumn, and also winter, before the breeding season. Installing it in advance allows some birds to discover the nest in time to occupy it for the cold seasons and then use it in spring for reproduction. Later installations are better for migratory birds such as the hoopoe, Eurasian wryneck, redstarts and flycatchers, as they use the nests from April.

Bubble Nest should be placed in peaceful and bright spots, out of reach of curious onlookers as well as cats. You can also place multiple nests near to one another, perhaps using the many colours of filament available! If you have a garden you can hide them in the branches of trees, fixing them securely and making sure to leave the entrance accessible. If you live in the city you can place it in the balcony under the eaves or on the balcony above. Do not put material inside; if needed the birds will arrange their own. To facilitate hatching you can put a handful of sawdust at the bottom, but nothing else. The nests should be cleaned annually by the end of September, otherwise the nest will not be used by birds in the next breeding season. In order to avoid the abandonment of the brood, look in as little as possible, and only if necessary!

Bubble Nest is an “open box nest” suitable for Flycatchers, Robins, White Wagtails, Redstarts, Wren and Blackbirds. It is important to know the habits of the various species that you want to attract to the nest. The autumn and winter months are the ideal time for the installation of the nest; if you put it in the vicinity of some feed (supermarket feed is fine - no breadcrumbs) this will facilitate the identification of the nest by birds.

Tips & Tricks
THE SPOOL HOLDER

Use the tape at the bottom of the holder to fix it on your desk.
In this way the spool will stay stable on the desk.
The tape doesn’t leave any residuals, doesn’t damage surfaces and can be attached and detached several times.
Please note: Only our "M [1.1 Kg]" spools include the holder.


SPOOL ASSEMBLY

Insert the bracket given inside the spool and fix it steadily on the support.
Please note: Only our "M [1.1 Kg]" spools include the holder.


AVOID ENTANGLEMENT

Always remember to pull the filament and fix it to the dedicated holes once you finish printing. In this way you’ll avoid tedious overlaps that can cause filament breakage.


PRINTING TEMPERATURE

Do some printing test within the temperature range indicated on the box and find the ideal settings for your printer.


ATTENTION

In order to avoid the opening of the spool during the use, please do not remove any pieces until filament is finished.

ECO design
THE SPOOL

The idea arises from the will and the need to reduce waste.
When the filament is over, the spool* could be easily transformed into a coat hanger.
Screws are: included.
*Only our "M [ 1.1 Kg ]" spools are convertible in a coat hanger.

Spool_to_Coat_Hanger.gif


EUMAKEIT

We've created some 3D models, absolutely free, to give new shapes to our spool*.
Download, print, and mount them with some parts of the spool*.
You'll be able to easily create lamps, supports for headphones and tablets, and a lot more.
*Only the parts of our "M [1.1 Kg]" spools are reusable together with the free downloadable 3D models of our site.

EXPLORE 3D MODELS

EUMAKEIT_Scheme_Page_rev.01.gif

ECO BIN BOX

EUMAKERS supports the principles of the circular economy.
This is why we designed our small boxes to be converted into practical eco bin boxes for your recycling.

LEARN MORE

Cardboard_to_ECOBin.gif

Utility
EUMAKERS Color/Product Sheet [.pdf] Download
EUMAKERS Infill Palette Test [.stl] Download
Reviews

Write Your Own Review

You're reviewing: Bubble Nest [Birdhouse]

DELIVERY & RETURNS

Customer satisfaction is our priority
 
FREE WORLDWIDE SHIPPING

Free worldwide shipping and handling for filament orders over €115.

 
SUPPORT 24/7

Contact us 24 hours a day, 7 days a week.

 
14 DAYS RETURN

Simply return it within 14 days for an exchange or refund.

 
100% PAYMENT SECURE

We use encrypted SSL security to ensure that your payments are 100% protected.