FREE WORLDWIDE SHIPPING on filaments orders over €115
My Cart

Mini Cart

PA Filament | Color: Nylon Glass Fiber Translucent White
49.5

PA Filament | Color: Nylon Glass Fiber Translucent White

€49.50 €49.50 - €290.00 €290.00

High quality 3D printing PA filament Nylon Glass Fiber in Translucent White color.

 

NYLON GLASS FIBER is a high quality filament in reinforced polyamide with glass fibers, which is odourless during the extrusion process.
Glass fiber filament is ideal for engineering prototypes that require optimal mechanical and heat resistance.

The manufactured articles obtained by the extrusion of this material cannot be deformed.

 

N.B. We recommend using stainless brass or resistant copper alloy nozzles.

 

100% Made in Italy with Solar Energy

 

- +
FREE WORLDWIDE SHIPPING on filaments orders over €115
Only %1 left
Details
TECHNICAL SPECIFICATIONS VALUE TEST METHOD - ASTM
Material Glass Fiber Reinforced Polyammide -
Density 1,18 g/cm3 1183
Impact Strenght 80 Kj/m2 179/2-1eU
Melting Point 180° C 11357
Tensile Modulus 4000 MPa 527
Tensile Strength 95 MPa 527
Shore Hardness 77 MPa 2039-1
Heat Deflection Temp. HDT/A 160° C 75
Thermal Expansion Coeffcient 0,1 10-4/K 11359
Max Usage Temp. Long Term 90° - 120° C 2578
Max Usage Temp. Short Term 150° C 2578D
Dielectric Strength - IEC 60243
Specific Volume Resistivity 1011Ωm IEC 60243
Flammability HB 1210
Linear Mould Shrinkage 0,5 294

 

FILAMENT SPECIFICATIONS VALUE AND TOLERANCES
Filament net weight ± 0.5 Kg / ± 1.8 Kg / ± 3.0 Kg
Roundness deviation Max 2%
Colours Semi-Transparent White
Diameter 1.75 mm / 2.85 mm
Diameter Tolerance ± 0.05 mm
Recommended printing temperature 240°-260°
Recommended printing speed 40 mm/s
Recommended bed temperature 20° C (Not necessary)

 

PRODUCTION

All EUMAKERS’ filaments are produced with solar energy in our factories situated in Italy, respecting the highest standards of production.

QUALITY CONTROL

We check each component used in the production of our coils in our laboratories. A laser measurement system allows us to have real-time production control to guarantee high-quality products and low tolerance values.

PACKAGING

All filaments and spools are vacuum-sealed to prevent damage from environmental exposure. In the box, you will find a zipper bag to storage them after use.
The boxes we ship the filaments with are made of impact and water-resistant cardboard. This prevents damage during transport.

SHIPPING

Worldwide. FREE shipping for the purchase of filaments from €115.

INNOVATION & DEVELOPMENT

EUMAKERS is -together with Rigenera Biocompound and SMP- part of the Sfregola Group, active since 1963, and known today as one of the leading Italian companies in the field of regeneration, development of innovative polymers, and processing of plastic materials.
For more information, please see our Company Profile.

Technical Sheets & Certificates
TDS - Polymer DataSheet Download
TDS - Filament DataSheet Download
MSDS - Safety Sheet Download
REACH Declaration of Conformity Download
Tips & Tricks
THE SPOOL HOLDER

Use the tape at the bottom of the holder to fix it on your desk.
In this way the spool will stay stable on the desk.
The tape doesn’t leave any residuals, doesn’t damage surfaces and can be attached and detached several times.
Please note: Only our "M [1.1 Kg]" spools include the holder.


SPOOL ASSEMBLY

Insert the bracket given inside the spool and fix it steadily on the support.
Please note: Only our "M [1.1 Kg]" spools include the holder.


AVOID ENTANGLEMENT

Always remember to pull the filament and fix it to the dedicated holes once you finish printing. In this way you’ll avoid tedious overlaps that can cause filament breakage.


PRINTING TEMPERATURE

Do some printing test within the temperature range indicated on the box and find the ideal settings for your printer.


ATTENTION

In order to avoid the opening of the spool during the use, please do not remove any pieces until filament is finished.

ECO design
THE SPOOL

The idea arises from the will and the need to reduce waste.
When the filament is over, the spool* could be easily transformed into a coat hanger.
Screws are: included.
*Only our "M [ 1.1 Kg ]" spools are convertible in a coat hanger.

Spool_to_Coat_Hanger.gif


EUMAKEIT

We've created some 3D models, absolutely free, to give new shapes to our spool*.
Download, print, and mount them with some parts of the spool*.
You'll be able to easily create lamps, supports for headphones and tablets, and a lot more.
*Only the parts of our "M [1.1 Kg]" spools are reusable together with the free downloadable 3D models of our site.

EXPLORE 3D MODELS

EUMAKEIT_Scheme_Page_rev.01.gif

ECO BIN BOX

EUMAKERS supports the principles of the circular economy.
This is why we designed our small boxes to be converted into practical eco bin boxes for your recycling.

LEARN MORE

Cardboard_to_ECOBin.gif

Utility
EUMAKERS Color/Product Sheet [.pdf] Download
EUMAKERS Infill Palette Test [.stl] Download
Reviews

Write Your Own Review

You're reviewing: PA Filament | Color: Nylon Glass Fiber Translucent White

DELIVERY & RETURNS

Customer satisfaction is our priority
 
FREE WORLDWIDE SHIPPING

Free worldwide shipping and handling for filament orders over €115.

 
SUPPORT 24/7

Contact us 24 hours a day, 7 days a week.

 
14 DAYS RETURN

Simply return it within 14 days for an exchange or refund.

 
100% PAYMENT SECURE

We use encrypted SSL security to ensure that your payments are 100% protected.